|
|
Build Your Online Product Catalogs?
| Product Name: |
Sinjoe Laser CO2 Laser Tube Reci 80w
|
| Supply Ability: |
10000 |
| Related proudcts |
laser, |
| Specifications |
Reci tube is one of the most famous co2 laser tube manufactured |
| Price Term: |
FOB |
| Port of loading: |
shenzhen |
| Minimum Order |
1 |
| Unit Price: |
339.9 |
|
Model: Reci Z2 co2 laser tube
Normal power : 80Watt
Peak power: 90Watt
Max working life***n: 10000 working hours
Average working life***n: 12-24 months (effected by cooling system ability,Machine usage,Frequency,working temperature,etc )
Please attention that there are many fake brand tubes with different watt in the market.
Each co2 glass laser tube has Normal power and Peak power. Please choose all you need based on Normal power.
1.Installation Requirement
Make sure to follow the operation instruction of model Z2 as shown in the illustration. The dedicated power
DY10 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 19kv).
It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube
will be punctured by electricity and may cause water leakage.
2.Operation conditions Water cooling: using purified water; 2 to 5 liter/minute;
water temperature: 10â„?40â„?The operating environment: temperature 2-40â„? humidity 10-60%.
The working current: test current is 29mA. Maximum working current is 29mA. The running current
must be kept below 27mA. The life ***n can reach 8,000 hours if the current is kept below 25mA.
The ammeter must be connected to the negative electrode of laser tube.When it is working under over-high current for long term, the negative pole will appear light yellow and the life ***n will be shortened rapidly.
To protect dust from going into the insulation sheath, please wrap it with plastic film.
3.Working Performance
Cutting function.Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization,
the laser can be used for high-frequency impulse engraving.
4.Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise
the output power will be seriously affected. The followings are the designated methods to
clean up pollution in the exterior surface o |
| Company: |
Shenzhen Sinjoe Laser Technology Co.,Ltd
|
| Contact: |
Mr. Sinjoe Laser |
| Address: |
Block A, No.37, Baishi 5 Fang, Baishizhou, Nanshan District,Shenzhen |
| Postcode: |
518000 |
| Tel: |
8675586658782 |
| Fax: |
8675586658782 |
| E-mail: |
|
|
|
|
Home
